GSM - GPRS - GNSS - Bluetooth HAT for Raspberry Pi

GSM - GPRS - GNSS - Bluetooth HAT for Raspberry Pi

SKU: WS13460
HAN: 13460
Kategorie: Raspberry Pi
Hersteller: Waveshare

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.

27,97 €

inkl. 20% USt. , zzgl.

Alter Preis: 36,00 €

1 Stück im Geschäftslokal lagernd
Versandzeit: 1 - 3 Werktage (AT - Ausland abweichend)

Beschreibung
Bewertungen
Frage zum Artikel

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.

It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.

Features

General

Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
Bluetooth 3.0, supports data transferring through Bluetooth
Onboard USB TO UART converter CP2102 for UART debugging
6x LEDs for indicating the module working status
SIM card slot for 1.8V/3V SIM card
RTC with backup battery holder
Baudrate auto detection (1200bps ~115200bps)
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
Supports SIM application toolkit: GSM 11.14 Release 99
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

GSM/GPRS

Band
- GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
- Quad-band auto search
- Compliant to GSM phase 2/2+
Emitting power
- Class 4 (2W @ GSM 850/EGSM 900 MHz)
- Class 1 (1W @ DCS 1800/PCS 1900 MHz)
GPRS connectivity
- GPRS multi-slot class 12 (default)
- GPRS multi-slot class 1~12 (configurable)
GPRS data feature
- Downlink speed: max 85.6kbps
- Uplink speed: max 85.6kbps
- Coding schemes: CS-1\CS-2\CS-3\CS-4
- Supports PAP (Password Authentication Protocol) for PPP connection
- Supports PBCCH
- Supports USSD
SMS
- Supports: MT/MO/CB/Text/PDU mode
- SMS storage: SIM card
Audio
- Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate
- Supports echo cancellation
- Supports noise reduction

GNSS

Receiver type
- 33 tracking channels
- 99 acquisition channels
- GPS L1 C/A code
Sensitivity
- Tracking: -165 dBm
- Cold starts : -148 dBm
Time-To-First-Fix
- Cold starts : 28s (typ.)
- Hot starts : < 1s
- Warm starts: 26s
Accuracy
- Horizontal position : <2.5m CEP

Bluetooth

Integrates AT commands
Compliant to Bluetooth specification3.0 + EDR
Supports SPP, OPP, HFP/HSP, etc.

Misc

Operating voltage: 5V
Operating temperature: -40°C ~ 85°C
Storage temperature: -45°C ~ 90°C
Dimensions: 30.2mm x 65mm

What's on Board

SIM868 module
ZMM5V1: regulator diode
SMF05C: TVS diode
CP2102: USB TO UART converter
MP1482: power chip
NDC7002N: voltage level translator
GPS status indicator
NET indicator:
- flashes fast when the module starts up
- flashes slowly after GSM register succeed
STA module working status indicator
SIM868 UART Tx/Rx indicator
Power indicator
SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
Raspberry Pi GPIO connector
SIM card slot
USB TO UART interface
3.5mm earphone/mic jack
GNSS antenna connector
Bluetooth antenna connector
GSM antenna connector
CR1220 battery holder: for RTC backup battery
UART selection switch
- A: control the SIM868 through USB TO UART
- B: control the SIM868 through Raspberry Pi
- C: access Raspberry Pi through USB TO UART

Resources

Es gibt noch keine Bewertungen.

Kontaktdaten

E-Mail

Frage zum Artikel

Ihre Frage

Montag	10:00 - 18:30
Dienstag	13:00 - 18:00
Mittwoch	10:00 - 18:00
Donnerstag	13:00 - 18:00
Freitag	10:00 - 18:00
Samstag	10:00 - 12:00
Sonntag	Geschlossen